ምደባ
ለበለጠ መረጃ
ACME Xingsha ኢንዱስትሪያል ፓርክ፣ ምስራቅ ሊያንግታንግ መንገድ , ቻንግሻ ከተማ, ሁናን
ቀጣይነት ያለው የሲንተር እቶን
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.
- ቴክኒካዊ ባህሪዎች
- ተዛማጅ አማራጭ ውቅር
መግለጫ
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.
መተግበሪያ:Ceramic products such as SiC, Si3N4 and AlN.
Specifications of Continuous Sinter Furnace
ሞዴልስፔክ | የስራ ዞን መጠን (D × H ) (mm) | ከፍተኛ. የሙቀት መጠን (° ሴ) | Section Temperature Uniformity (°C) | ሂደት ጋዝ |
CSF-0202 | 200 x 200 | 1700/1900/2400 | ± 5/±7.5 | አየር/ኤን2/Ar/H2 |
CSF-0303 | 300 x 300 | 1700/1900/2400 | ± 5/± 7.5 | Air/N2/Ar/H2 |
CSF-0404 | 400 x 400 | 1700/1900/2400 | ± 5/± 7.5 | Air/N2/Ar/H2 |
ከላይ ያሉት መመዘኛዎች ከሂደቱ መስፈርቶች ጋር ሊስተካከሉ ይችላሉ, እንደ ተቀባይነት ደረጃ አይደሉም, ዝርዝር መግለጫው. በቴክኒካዊ ፕሮፖዛል እና ስምምነቶች ውስጥ ይገለጻል. |
ቴክኒካዊ ባህሪዎች
1.To use newly develop high temperature heating technology, with high temperature and long service life;
ያለማቋረጥ 2. ጫን እና ማራገፍ, ጥሩ የማተም ስራ እና ዝቅተኛ የጋዝ ፍጆታ;
3.It can be used for continuous sintering of ceramic part, and continuous sintering of powder material;
4.Automatic load, push, unload and discharge for powder, stable quality and less labor;
5.Furnace hot zone length can be customized design.
Optional Configuration of Continuous Sinter Furnace
1.Insulation material: graphite felt/carbon felt/ceramic fiber felt/graphite brick/ceramic brick
2.Heating element: C/C composite/ graphite/ metal/ SiC
3.Muffle: C/C composite/ graphite/ ceramic/ metal
4.Process gas system: volume flow-meter
5.Thermocouple: C type/S type/K type/N type
6.Pyro-meter:Dual-color/Single color; CHINO/Raytek