ምደባ
ለበለጠ መረጃ
ACME Xingsha ኢንዱስትሪያል ፓርክ፣ ምስራቅ ሊያንግታንግ መንገድ , ቻንግሻ ከተማ, ሁናን
ጋዝ Atomization የዱቄት ማምረቻ መሳሪያዎች
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.
- ቴክኒካዊ ባህሪዎች
- ተዛማጅ አማራጭ ውቅር
1. አጭር መግቢያ
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.
2. Equipment Features
Can produce most of the metal and alloy powders at low cost.
The metal powder is sub-spherical or irregular;
The metal melt solidifies quickly without segregation;
The particle size distribution of the powder can be controlled through appropriate process adjustment.
3. ዋና ቴክኒካዊ መግለጫ
ሞዴል | ACME/GA-10 | ACME/GA-50 | ኤ.ሲ.ኤም. /GA-100 | ACME/ GA-200 | ACME/ GA-300 |
Melting temperature(℃) | 1750 | ||||
የኃይል ዓይነት | AC/380V/50Hz | ||||
ችሎታ (ኪግ) | 10 | 50 | 100 | 200 | 300 |
Melting furnace power (kW) | 50 | 100 | 160 | 250 | 300 |
Tundish heating method | medium frequency induction / resistance heating | ||||
Tundish power(kW) | 15-45 | ||||
የሙቀት ልኬት | Infrared temperature measurement/W/Re 5/26 | ||||
Gas flowL/min) | 8000-30000 | ||||
የማቀዝቀዣ ዘዴ | Cooling tower / water cooling unit + heat exchanger |
4. የማዋቀር ምርጫ
Medium Frequency power supply: IGBT;KGPS
HMI: Analog screen; computer touch screen
Control method: Industrial computer, PLC
Other components: High-quality Chinese brand; Foreign brand
it can also be adjusted according to different technical requirements to do customized design
1. አጭር መግቢያ
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.
2. Equipment Features
Can produce most of the metal and alloy powders at low cost.
The metal powder is sub-spherical or irregular;
The metal melt solidifies quickly without segregation;
The particle size distribution of the powder can be controlled through appropriate process adjustment.
3. Configuration selection
Medium Frequency power supply: IGBT;KGPS
HMI: Analog screen; computer touch screen
Control method: Industrial computer, PLC
Other components: High-quality Chinese brand; Foreign brand
it can also be adjusted according to different technical requirements to do customized design