Vakuum karbonisasie oond

Hierdie oond word gebruik vir lae temperatuur en hoë temperatuur karbonisering van saamgestelde materiale. Dit kan ook gebruik word vir ontbinding en sintering van spesiale materiale onder suurstof atmosfeer. Dit het beide horisontale en vertikale strukture.

ONDERSOEK

tegniese eienskappe
Verwante opsionele konfigurasie

Beskrywing
Hierdie oond word gebruik vir lae temperatuur en hoë temperatuur karbonisering van saamgestelde materiale. Dit kan ook gebruik word vir ontbinding en sintering van spesiale materiale onder suurstof atmosfeer. Dit het beide horisontale en vertikale strukture.

High temperature carbonization: Using graphite heating element, the max. temperature can reach above 1600℃.

Low temperature carbonization: Using all metal hot zone, the max. temperature is 1100℃.

aansoek:It is used for carbonization and pyrolysis of carbon fiber insulation materials, C/C composite and etc.

Specifications of Vacuum Carbonization Furnace

Modelspes	Werksone Grootte (B × H × L) (mm)	Maks. Temperatuur (°C)	Temperatuuruniformiteit (°C)	Uiteindelike vakuum (Pa)	Drukverhogingskoers (Pa/h)
HVC-060609	600 × 600 × 900	1500	± 7.5	1-100	2
HVC-101015	1000 × 1000 × 1500	1500	± 10	1-100	2
HVC-131320	1300 × 1300 × 2000	1500	± 10	1-100	2
HVC-161633	1600 × 1600 × 3300	1500	± 15	1-100	2
HVC-161570	1600 × 1500 × 7000	1500	± 15	1-100	2
HVC-201840	2000 × 1800 × 4000	1500	± 15	1-100	2

VVC-0608	×600 × 800	1500 / 1000	±5/± 10	1-100	2
VVC-1015	Φ1000 × 1500	1500 / 1000	±5/± 10	1-100	2
VVC-1120	×1100 × 2000	1500 / 1000	±5/± 10	1-100	2
VVC-1320	×1300 × 2000	1500 / 1000	±5/± 10	1-100	2
VVC-1620	×1600 × 2000	1500 / 1000	±15/± 20	1-100	2
VVC-1730	×1700 × 3000	1500 / 1000	± 15	1-100	2
VVC-1822	×1800 × 2200	1500 / 1000	± 15	1-100	2
VVC-2032	Φ2000 × 3200	1500 / 1000	± 20	1-100	2
VVC-2632	Φ2600 × 3200	1500 / 1000	± 20	1-100	2
VVC-3338	Φ3300 × 3800	1500 / 1000	± 20	1-100	2
Bogenoemde parameters kan aangepas word by die prosesvereistes, hulle is nie as aanvaardingstandaard nie, die detailspesifikasie. sal in die tegniese voorstel en ooreenkomste vermeld word.

tegniese eienskappe

1. Using multiple temperature control zones, great temperature uniformity;

2. It configured with external forced cooling system to shorten the production cycle;

3. Using positive or negative pressure carbonization process;

4. It has treatment for the tar, solid dust and exhaust gases during the carbonization process;

5. Using all metal high temperature muffle, it can work in oxygen, and has great anti-contamination feature, it can also working in various gases and conditions.

Optional Configuration of Vacuum Carbonization Furnace

1. Furnace door: screw/hydraulic/manual elevation type; swing opening/parallel opening(large size furnace door); manual tight/ auto lock-ring tight

2. Furnace vessel：all carbon steel/inner layer stainless steel/all stainless steel

3. Furnace hot zone：Refractory brick+ceramic fiber/soft carbon felt+Rigid board

4. Heating element：Ni-Cr；Fe-Cr-Al；Fe-Cr-Al-Nb；Fe-Cr-Al-Mo/ Graphite

5. Muffle：SUS304；SUS316L；SUS310S/Graphite

6. Process gas system：volume/mass flow-meter

7. Thermocouple：K type/N type/C type/S type