SPYSKAART

home>produkte>C&SiC Composites Industriële Verhitting Toerusting

Kontak Ons

+86-151 7315 3690( Jessie Mobile)

oorsee@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan

Gasdruk sinter oond

Gasdruk sinter oond

It is used for vacuum sintering and pressure sintering of ceramic products. It has both horizontal and vertical structures. Debinding is an option function.

ONDERSOEK
  • tegniese eienskappe
  • Verwante opsionele konfigurasie

Beskrywing
It is used for vacuum sintering and pressure sintering of ceramic products. It has both horizontal and vertical structures. Debinding is an option function.

aansoek:Ceramic part such as SiC, Si3N4, B4C, AlN and etc.

Specifications of Vacuum Sintering Furnace

Modelspes

Werksone Grootte

(B×H×L) (mm)

Maks. Temperatuur (°C)Temperatuuruniformiteit (°C)Uiteindelike vakuum (Pa)Max. Pressure (MPa)
HPSF-4412400 × 400 × 12001500-2000±5/± 101-10010
HPSF-5512500 × 500 × 12001500-2000±5/± 101-10010
HPSF-5518500 × 500 × 18001500-2000±5/± 101-10010

VPSF-0203×200 × 3001500-2000±5/± 101-10010
VPSF-0308×300 × 8001500-2000±5/± 101-10010
VPSF-0612×600 × 12001500-2000±5/± 101-10010
VPSF-0716×700 × 16001500-2000±5/± 101-10010
VPSF-0815×800 × 15001500-2000±5/± 101-10010
VPSF-0917×900 × 17001500-2000±5/± 101-10010
Bogenoemde parameters kan aangepas word by die prosesvereistes, hulle is nie as aanvaardingstandaard nie, die detailspesifikasie. sal in die tegniese voorstel en ooreenkomste vermeld word.

tegniese eienskappe

1.The furnace uses special hot zone structure and heating element design, good  temperature uniformity;

2.Using special designed debinding muffle which has good sealing, complete binder removing and no contamination to inside components features;

3.It has functions of vacuum sintering, pressure sintering, negative pressure debinding and etc;

4.It has over temperature and over pressure mal-function alarm, mechanical automatic pressure protection and interlocking, high safety protection;

5.It configured with debinding system to achieve debinding and sintering of ceramic products.


Optional Configuration of Gas Pressure Sinter Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/ auto lock-ring tight

2.Oondvat: alle koolstofstaal/binnelaag vlekvrye staal/alles vlekvrye staal

3.Oond warm sone: sagte koolstof vilt / sagte grafiet vilt / harde saamgestelde vilt / CFC

4. Verhittingselement en moffel: isostatiese persgrafiet/hoë suiwerheid, sterkte en digtheid grafiet/fyngrootte grafiet

5.Process gas system: volume/mass flow-meter

6.Termokoppel: K tipe/N tipe/C tipe/S tipe

ONDERSOEK

Verwante Produkte


plek
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Foon
+ 86-151 7315 3690(Jessie Mobile)
E-Mail
oorsee@sinoacme.cn
Wie is Ons

ACME (Advanced Corporation for Materials & Equipments) is in 1999 gestig in Xingsha Industrial Park, met 'n oppervlakte van 100,000 2 mXNUMX. ACME is 'n hoë-tegnologie onderneming wat spesialiseer in die vervaardiging van industrie verwarming toerusting vir nuwe materiaal en energie. Privaatheidsbeleid | Terme en voorwaardes

Kontak Ons