Deurlopende sinteroond

It is used for continous sintering of ceramic products, ceramic powder materials and fibers.

ONDERSOEK

Beskrywing
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.

aansoek:Ceramic products such as SiC, Si3N4 and AlN.

Specifications of Continuous Sinter Furnace

Modelspes	Werksone Grootte (D × H ) (mm)	Maks. Temperatuur (°C)	Section Temperature Uniformity (°C)	Process gas
CSF-0202	200 × 200	1700 / 1900 / 2400	± 5/ ±7.5	Air/N₂/Ar/H₂
CSF-0303	300 × 300	1700 / 1900 / 2400	± 5/± 7.5	Air/N₂/Ar/H₂
CSF-0404	400 × 400	1700 / 1900 / 2400	± 5/± 7.5	Air/N₂/Ar/H₂
Bogenoemde parameters kan aangepas word by die prosesvereistes, hulle is nie as aanvaardingstandaard nie, die detailspesifikasie. sal in die tegniese voorstel en ooreenkomste vermeld word.

tegniese eienskappe

1.To use newly develop high temperature heating technology, with high temperature and long service life;

2.Load and unload continuously, good sealing performance and low gas consumption;

3.It can be used for continuous sintering of ceramic part, and continuous sintering of powder material;

4.Automatic load, push, unload and discharge for powder, stable quality and less labor;

5.Furnace hot zone length can be customized design.

Optional Configuration of Continuous Sinter Furnace

1.Insulation material: graphite felt/carbon felt/ceramic fiber felt/graphite brick/ceramic brick

2.Heating element: C/C composite/ graphite/ metal/ SiC

3.Muffle: C/C composite/ graphite/ ceramic/ metal

4.Process gas system: volume flow-meter

5.Thermocouple: C type/S type/K type/N type

6.Pyro-meter：Dual-color/Single color; CHINO/Raytek